This Fan add on, is a very easy install, usable on any brand or model RV refrigerator. The Fan kit will come with mounting hardware, Wire Harness, Automatic Thermostat activating Fan around 85 degree thermostat hangs loose to read air temps behind refrigerator and  ON-OFF master DC Power switch mounted in a holder,  

 We have an after market FAN that will increase the flow of air up through the Condenser fins for fast removable of heat that was pulled from the inside food zone, the cooling of the inside of the food zone cools faster and able to maintain cold during the hottest of weather when you have a good flow of air through the condenser fins..

 The most important way for getting your RV refrigerator to cool correct, is good flow of air blowing up through the condenser fins. Fans are not used to remove heat from the compartment, they are only used to increase air flow through the condenser fins.  Most RV refrigerators need the increased air flow when the out side temps reaches 85 degrees or higher.

Fan over all size and Specs.

4 3/4 by 4 3/4 by 1 1/4

RPM 2300

Amp 0.25

DC voltage up to 13.7v

DC Brushless

Ball bearing

It can be mounted in many ways you want, regardless where or how it's mounted the flow of air goes through the condenser fins.

This FAN is a great add-on for any refrigerator in a slide out room to help the air to exit out the upper vent.

The one picture shows a simple screw insert for the mount to attach the fan so you can mount at a location you need and at the angle you select. Just mark the spot. then inset is plastic so safe to use and no predrilling at any location. Adding a Digital Fan control, we sell, would have your cooling unit the best set up.