Norcold Special Package Kit we put together 2 Option Kits for customers that purchased a Norcold Cooling Unit and also want to add or upgrade to have the need to increase the air flow and to replace the AC heating element for the cooling unit they purchased.

Option #1 Clamp ON Fan kit goes with Reman unit : The Special kit will include a New AC electric heating element for your model refrigerator the 2 Fan Clamp ON Fan kit with wire Harness, Auto Thermostat Fan switch to activate fan for Remanufactured cooling units or OEM Norcold.

Option #2 Flush Mount Fan kit goes with Brand-new cooling unit :The Special kit will include a New AC electric heating element for your model refrigerator the 2 Fans 12032 Flush mounted Fan with wire Harness, Auto Thermostat Fan switch to activate fan for Brand-new Amish Built Cooling Units.

Let us Know it your unit need kit for a Reman or for the Brand-new Amish built.

They are 2 different style fans we use, depending on if the cooling unit is the Reman or OEM Norcold (option #1) or the Brand-new Amish built Cooling Unit (option #2)

This is a 2 fan setup designed for an easy on install for any style, any model, any brand, or any size cooling unit coils.  The 2 fan setup will come with wiring harness, automatic thermostat to activate the fans. We will ship one of 2 styles, if you order a Remanufactured cooling unit has the clamp on style fan kit or a Brand-new Amish built cooling Unit with the 12032 style kit. We ship a style fan switch thermostat for air temp for reaching around the 85 degree or warmer behind the refrigerator when the cooling unit is needing the higher flow of air through the condenser fins to activate fans. The fan thermostat is at the end of the wire harness next to the fans and hangs loose not mounted. If you order the Brand-new Amish Built cooling unit we ship a style fan switch that would be mounted on the Steam pipe as the new unit is premade for.  When you install fans and ready to wire the fans, all that's needed is a 12VDC positive (from any source) and a good DC frame ground (from any source).  If you want to connect to the refrigerator DC, the wire harness will come with a piggyback terminal so you do not need to cut any original wires to use fan harness wiring. All wire terminal for hook up are furnished and already crimped to wire harness. 

No holes drilled at any time to mount fans or brackets.

The fan specs are:

DC Brushless Fan Motor

Fan Motor has Ball Bearings

DC 12 volt range 10.2 to 13.7 

9025 fan option #1 has Amp draw 0.15a.... 12032 fan option #2 amp draw 0.25

3000 RPM

CFM Air flow 46.46

dBA 28.58

option #1 fan size: 92 x 92 x 25 mm or 3 3/8 x 3 5/8 x 1 inch

option #2 fan size 120 x 120 x 32 mm or 4 3/4 x 4 3/4 x 1 1/4 inch