The LED series has been upgraded to a brighter White light, ready for shipping. .
A very simple and quick way to increase your refrigerator cooling, simply install a add-on evaporator fins fan to any model with the Special LED accent light, 2 toggle switches to turn on fan or LED White light separate.
We have mainly sold this Deluxe LED fan through our web site. We have sold over 4000's this year of the Deluxe Fans, we are making it available now through eBay. For every cooling unit sold through our web site, the customer is adding a evaporator circulation fan to their order.
This unit does not have to be wired to the interior light since not all RV Refrigerator have a usable interior usable light, but can if you confirm refrigerator has DC power to light at all times when the door switch pushed/Door Closed. Why take a chance miss-wiring to damage PC Board controlled light DC power slide the fan wire through the drain tube to make a DC connection on the back side.
Make your refrigerator cold not just marginally cool.
Here are just a few of the benefits
Inside temps are even from top to bottom
Your fan will allow the RV refrigerator to maintain colder though out top to bottom
Thermostat setting does not have to be set so cold
Fan can be wired to interior 12 vdc light if use able or any 12 volt DC power source
Fan has 2 OFF-ON switches for independent control of light or fan,
Fan can be wired to any 12 vdc power when refrigerator has no useable interior light
Heavy gauge Metal Powder Coated frame with Stainless Steel cable, push on locking clips plus a metal grill for keeping the fingers out.
Some Competitors Fan frames are only Plastic with alligator clips
Fan can be used to dry out refrigerator after the refrigerator is turned off
Easy push on mounting that's Stainless Steel. No alligator spring clips to rust or slide down in transit like most competitors units
No drilling to mount Fans, push on locking clips
Saves a weak cooling refrigerator, allowing it to cool food to a save temperature
Fans fits any RV Brand or Model, with or without DC power to Refrigerator from a small single door to the large side by sides.
Mounting of Fans to evaporator will save money due to refrigerator cools faster.
Keeps Fins from heavy frost build up
No need to defrost
A very low amp draw, 0.1amp per fan 12VDC to 13.7VDC Brushless Motor
With some models this Fan wiring was designed to be a Plug n Play install.
One year replacement warranty
A Great gift for a friend
Some of the newer Refrigerators in RV's do not have the light for the quick hook up, so we have designed the fan to be wired either to light or to any 12 vdc source without any fan modifying. It will come with all terminals needed, so you can wire as needed.
Great safety feature with this add-on fan, from others of this style, it does not have to be wired to the interior light, which has an inline fuse to prevent, if fan shorts out burning up your PC board of most RV refrigerator used.
This Dual Fan frame is same color as the inside Evaporator Fins giving a more attractive inside from having odd stand out color fans like competitors.
The fan is not the standard small fan used by competitors, check out the size.
Each fan size is 2 3/8 x 2 3/8 with over All frame widths are 6 1/2 inch and height of 4 1/8 and thickness 1/2. A fan CFM 14.67 Amp Draw 0.10 to 0.14
The fan moves more air through out the refrigerator, spreading the cold condenser fin temperature faster from top to bottom
The cable not only is used to mount, it is also used as Vibration Damper with stainless steel push on grounding locking clips.
The electrical wire is about 72 inches long giving you enough to work with, not only is the wires long, it's doubled and protected in a sleeve.
This unit comes with the 2 chrome Metal grills